Tower XXX De-scaler
+ Tower XXX Cleanser |
System Hush
|
Kamco System Hush
Some heating systems can be susceptible
to noise problems as a result of baked on corrosion and limescale
deposits on the heat exchangers.
You can add 1 Litre of System Hush to cleanse the heat exchanger
and this can be left in the system.
|
Fernox DS-10 |
Fernox
DS-10 is used to clean the combustion surfaces of modular boilers
by immersion of the heat- exchanger in a solution of the product.
Note: Fernox DS-10 must not be used
with boilers employing aluminium heat exchangers. Refer to manufacturer’s
service literature for detailed instructions. |
Hyper Flush |
Kamco Hyper Flush
This is a non acid flushing liquid
with extra solvency power to take debris into suspension for
easy removal by power flushing.
|
Fernox DS-3 |
Fernox
DS-3 is used for removing limescale from any type of water heater,
hence restoring its efficiency. It is safe to use with Steel,
Stainless Steel, Cast Iron, Copper, Brass, PVC, ABS, Rubber Polythene
and most Plastic Pipework. |
Fernox DS-40 |
Eliminates
boiler noise.
Compatible with mixed metal systems.
Supplied with neutralising agent
Non-toxic.
DS-40 should NOT be used in conjunction with galvanised components,
asbestos-concrete or painted feed and expansion tanks. |
Sentinel X200 |
Sentinel X200
A unique, life-long system treatment for
the elimination of lime scale and boiler noise. Safe to use
in all types of indirect central heating systems and will quickly
pay for itself in reduced fuel usage.
|
Sentinel X300 |
Sentinel
X300
Flushes out flux and installation debris
from new indirect central heating systems and those up to 6 months
old. An essential vaccination against scale, sludge and bacteria.
|
|
Please
Note:
When using any of the above Chemicals please refer to the manufacturers
information sheets
for the correct use and safety precaution required for your
system.
|